Stonex 1-3mm is a small coloured or natural stone that knits close together to give a seamless smooth (but textured) look. A PU coated stone combined with a UV stable polyurethane binder will ensure that you surface is colour fast. We can pore fill the floor to help with the maintenance issues or leave an open pore texture.
We strongly recommend that the product is pore filled, when used for an internal space. This involves filling the very small pores that exist in the surface with a clear grout, that makes the surface non porous and easier to maintain.
Stonex 1-3mm is made up of an aggregate, quartz or stone, coloured or natural, combined with a strong polyurethane resin to ensure you get a surface that lasts. Because of the aggregate size, this can be installed at less depth that Stonex 2-5mm.
Our range of Stonex surfaces is constantly growing, so please contact the office to discuss your needs or just get some samples.
Coloured aggregate is coloured with various organic and/or inorganic pigments and is heat treated and coated with an epoxy or polyurethane system.
Depending on the selected pigments and/or resins, the quartz will be more or less sensitive to UV. For applications
that are exposed to direct UV light, we recommend that a PU-coloured system be used.
Flexflooring Ltd is an independent installer and not tied to any one manufacturer or supplier of these systems.
For external installations we would always advise a UV stable (aliphatic) polyurethane binder. Polyurethane binders can also be used indoors, and have a certain amount of flexibility that will allow for a small amount of movement in the sub base.
An alternative binder is an epoxy binder. These binders cure very hard which although means they are much harder than a polyurethane, also means that they will not cope with much, if any, movement in the sub base. Epoxy binders will also yellow over time when exposed to UV light.
In an indoor environment we would recommend that a Stonex 1-3mm floor is pore filled. When the floor is installed there will exist a number of tiny pores between the stones, where dirt and small debris can become lodged.
A pore filler can be forced into these pores. The picture shows a Stonex 1-3mm floor during the pore fill. The white grout material fills the pores and then cures clear, giving a closed pore finish. This will also make the surface easier to clean.
July 2014 In July 2014, Flexflooring completed the installation of a smart Stonex interior for the new Audi Showroom in Tunbridge Wells. The work was commissioned by BDB Design Build Ltd, a specialist building contractor in motor retail responsible for the construction of many car showrooms up and down the country. Flexflooring were asked to … Continue reading
JULY 2016 PORSCHE CHISWICK Flexflooring have had a busy summer working along side BDB installing a number of surfaces at some of the big brand car dealerships. One such dealership was Porsche, Chiswick, where Flexflooring installed 436m2 of Remmers Epoxyflex PH system with non slip media and over 250m2 of stone carpet. This work compliments other … Continue reading