Playgrounds

Rubbaflex sg

Standard Grade Rubber for more bounce

Rubbaflex Play Ground is made from the EPDM granules and the most cost effective resins to ensure you get a floor that remains non-slip for the perfect playground flooring surface.

Overview

Rubbaflex® sg is a wet pour product made up of larger 1-4mm EPDM granules combined with a one-component polyurethane binder. It’s most common uses are in the construction of children’s play areas, golf path construction and occasionally splash parks. Because of the larger granule size, it is more porous than Rubbaflex fg and has to be installed at a greater depth than Rubbaflex fg.

As with all Rubbaflex products, numerous colours are available and can be blended together to give an infinite number of colour schemes.

Characteristic and benefits; soft, colourful, porous, impact absorbent, seamless

Typical Uses; Golf paths, Playground flooring, boat decks, balcony’s,

SG Granules

SG 1-4MMRubbaflex sg (Standard grade) EPDM granules are 1-4mm is size. There are made with specialist pigments and UV stabilisers. Flexflooring source these granules from a number of manufacturers in the UK and Europe. Not all granules are of the same quality, but through experience Flexflooring source from   tried and trusted producers.   This grade of EPDM is commonly used in the construction of children’s play areas, and golf paths. Either laid at 15 – 20mm on an asphalt or concrete sub base, or onto an SBR base rubber (laid at 25mm) layer which will sit on an compacted stone base.

Resins

Flexflooring use a selection of polyurethane binders sourced from aroAliphatic vs Aromaticund Europe.

There are two classes of polyurethane binders;

Aliphatic binders, are a non yellowing, UV stable binder which dramatically reduces colour fade. It is a class of isocyanate used in the manufacture of light stable coatings, more expensive than…

Aromatic binders, commonly used in the construction of playgrounds, but will cause colours to fade in UV light, as it is a class of isocyanate which is sensitive to Oxidisation and prone to degradation in direct sunlight.

It is far more common to install Rubbaflex SG with an aromatic resin, due to the installation depth. With black this makes no different, but one must be aware that other colours will yellow/golden.

Rubbaflex sg can be installed on a structural sub base such as concrete or asphalt. It can also be installed onto a compacted stone base.

For a structural sub base, Rubbafllex sg is installed at 15mm.

For a compacted stone sub base, a base course of 25mm needs to be installed first, before installing the 15mm wearing course, giving an overall depth of 40mm.

Standard Colours

14037849 10208927222771120 1815645886 o
Blue
14060317 10208927223091128 1801246808 o
Bright Blue
14037420 10208927224371160 463173065 o
Mid Grey
14012379 10208927223211131 410598850 o
Light Grey
14012760 10208927222691118 120415085 o
Yellow
14037707 10208927223491138 915180251 o
Bright Yellow

Other Blends

beige 20
Black; 20% beige fleck
black and eggshell
Black; 20% eggshell fleck
50percent beige
Earth; Beige, brown and black
To make an enquiry fill out the form below or call us on 01622 747909

Enquiry Box

  • This field is for validation purposes and should be left unchanged.
Enquire Now